Mexflow Copper Pipe

Specifications and Features:

Mexflow Copper Pipe and Tubes conform to ASTM B68, B75, B88, and B280. BS:EN 1057. BS:EN 13348. JISH 3300. BS 2871. EN 12735.

Inhouse Testing facilities:

Spectrometer for chemical composition test

Eddy current test

Tensile/Elongation test

Hydrostatic test

Pneumatic test

Carbon determinator test as per BS: 723

Carbon film test

Degreasing

Brand identification

Grain size test

Hydrogen embrittlement test

Plain Tubes:

Outer Diameter from 4.76 mm to 159 mm

Wall Thickness from 0.35 mm to 3.0 mm

Straight length up to 6 meters

Capillary Tubes:

The Outer Dia. of these capillary tubes varies from 1.5 mm to 3 mm and Wall Thickness from 0.3 mm to 0.6 mm

Straight length of any length can be customized as per the needs

Pancake coils single layer

The Outer Diameter of these pancake coils single layer starts from 4.76 mm to 19.05 mm

Wall Thickness from 0.41 mm to 1.24 mm

The Length of these pancake coils single layer is either 15 meters or 30 meters

Pancake coils double layer

The Outer Diameter of Pancake coils double layer starts from 4.76 mm to 19.05 mm

Wall Thickness from 0.41 mm to 1.65 mm

The Length of pancake coils double layer is either 15 meters or 30 meters

Installation Guidelines:

Brazing for the Mexflow Copper Pipe and Tubes should be carried out using oxy-acetylene / diluted acetylene flame source capable of achieving brazing temperatures of 650 degrees C and below the melting point of the base metal. Liquid Petroleum Gas LPG should not be used for brazing of these copper pipes and tubes.

Pipe jointing fittings should be end-feed capillary fittings conforming to ASME B-16.22

Pipe ends should be cut square with pipe axis using a sharp wheel cutter whenever possible and be cleaned to get rid of any cuttings or blurs. 

Sections of pipeline should be capped as soon as they are completed so as to prevent ingress of debris.